扬子工具
 
all product
serve promise
contact us

home > Business produce > The detacher is heated in mould bearing axle sleeve reaction SZQ's
The detacher is heated in mould bearing axle sleeve reaction SZQ's

The detacher is heated in mould bearing axle sleeve reaction SZQ's
In the save energy mould BGJ-C's mould bearing reaction detacher extensive use to the steel rolling mill , railroad maintenance section , harbor , dock along with else industrial and mining enterprises . To encircles inner place the bearing and wards off the ring and closely encircles and the gear and coupling and so on carries on temperature the person who disassembles fresh generation produce , that produce application electromagnetic induction rule , and is living inner place the bearing to encircle to come into being the induced current , and causes such generate heat to swell , thereby the gap is come into being in adaption part being living , and attains to be easy to the aim disassembling . Not thering is not the pollution since the fact that that the reaction is heated is swift and evenly and clean , it is tall to heat the quality , and the means such as gurrantee that the bearing does not accept injury , this the kind of well-developed means disassembling , and substitutes gradually the toasing and oil boils and so on .

One , the main composition
This engine consists of sections such as master control cabinet and reaction coil and so on .

Two , the use andoperation
1 , shall dominate cabinet taking possess on the control power source .
2 , shall dominate cabinet together with reaction coil connections in the way of the lead .
3 , going up the control switch together , the voltmeter ought to possess the instruction now .
4 , by the reaction coil suit be living on the bearing .
5 , regulates the bureau requires warm-up period , pushes down down the activate button , and heats to start . When the work heats till requireing time the leader shall the gathering shuts that blackout source either according to ceases the button once voluntarily .
6 , heating queen finishes , in immediate future brings out the reaction coil , and unloads down the bearing passablely .
7 , native engine may be dominateeed such through control cabinet either reaction coil heats together with ceases .

Three , technique parameter together with the performance

Type
Outside diameter
Inside opening
Broad
Electric current tension
Warm-up period 130 s
SZQ-1. 1.
320
180
168
380V is 65A's ( single phase )
1.3 minute
SZQ-2. 2.
185
130
78
380V is 30A's ( single phase )
1.5 minute
SZQ-3. 3.
193
160
195
380V is 60A's ( single phase )
1.5 minute
SZQ-4. 4.
191
160
220
380V is 60A's ( single phase )
1.3 minute
SZQ-5. 5.
247
170
80
380V is 21A's ( single phase )
1.6 minute

Four , pay attention to the matter
That 1 , native set bearing reaction detacher have to supply through consumer heats work standard dimensions but the customization .
2 , brings out the work surely will pay attention to , in order to provide against the scald .
3 , have to being living , the reaction coil heating components may be brought out in leader blackout rear .

Close down by window

© Copyright 2002-2012, 扬子工具集团有限公司 版权所有。电话:0523-86860853、86860243
全球扬子工具: 轴承感应加热器 电动试压泵 拉马 液压千斤顶 液压弯管机 工具网 bearing heater